Quick Release Blades
Quick Release Blades

An Industry First!!! The UltraWiz® Quick Release Long Knives allow you to change blades without tools; no more worn out screws or bent caps!  Just a smooth maneuver of rolling your thumb back over the safety catch while pushing down on the release lever allows for a quick release of the blade.  Techs say they are more inclined to flip the blade to the sharp side because it can be done so easily. 

Click for Spec Sheet  


At only 3/16" thick with three available lengths, UltraWiz® Long Knives easily fit between the deepest dash and windshield. Unique blade holder does not require excessive tightening of the Phillips screw; just loosen the screw to remove the blade. The blade-locating pin is extruded from the knife, no spring pins to loosen or aluminum to wear out. A urethane handle provides comfort and gripping power. The hardened steel UltraWiz® Long Knife is virtually indestructible.

UltraWiz® Trim Knife 4008-L
Many technicians trim the excess urethane from the pinchweld with a Long Knife. This 8´´ Trim Knife allows much more control than using a 13´´ or 18´´ knife. It has the same Ultrawiz® designed blade holder from our very popular L-13 and L-18 Long Knives.
   
Click for Spec Sheet

UltraWiz® Long Knife L13 4013-L
At 13´´ long, the L13 is made to fit in those tight interior areas. Made to the exact specifications and high quality of the L18, these knives are a one-time purchase!
   
Click for Spec Sheet

UltraWiz® Long Knife L18 4018-L
At only 3/16´´ thick and 18´´ long, this knife easily fits between the deepest dash and windshield. Unique blade holder doesn’t require excessive tightening of the Phillips screw; just loosen the screw to remove the blade. The blade locating pin is extruded from the knife; no spring pins that loosen or aluminum to wear out. A urethane handle provides comfort and gripping power. The hardened steel UltraWiz® Long Knife is virtually indestructible.
   
Click for Spec Sheet